Support & Documentation

What is NTRIP and why does the UNI-GR1 use it?

By the way, interested in digital surveying?

Read more about our UNI-GR1, an RTK GNSS Receiver. Digital surveying and performing stakeouts is now easier then ever. Available in a complete package and ready to use worlwide. Want to know more? Click here

Follow marXact on social media

The Network Transport of RTCM via Internet Protocol(NTRIP) is a protocol that enables the streaming of GNSS or RTK correction data over the internet. NTRIP is designed to broadcast differential correction data to GNSS receivers like the UNI-GR1. With this correction data the UNI-GR1 can be centimetre accurate.

The three major parts of NTRIP: The NTRIP-Client, the NTRIP-Server and the NTRIP-Caster:

NTRIP Server

The NTRIP-Server is a computer running NTRIP Server software and communicates directly with a GNSS reference station. The NTRIP-Server serves as the medium between the GNSS receiver (NTRIP Source) streaming RTCM data and the NTRIP Caster.

NTRIP Caster

The NTRIP-Caster is a HTTP server which receives streaming RTCM data from the NTRIP Servers and in turn streams the RTCM data to one or more NTRIP-Clients via the internet. The client in the diagram below is you while using the UNI-GR1.

NTRIP Client

The NTRIP-Client receives RTCM data from the NTRIP-Caster to apply as real-time corrections to a GNSS receiver like the UNI-GR1. On the NTRIP-Caster you can set your preferred mountpoint like “PRSRTCM3” to finally receive your correction data from the NTRIP-Caster. This can be done in the UNI-Connect.

Última actualización el 11/03/2021
1340 reads
How did you like this article?0000